Loctite PL Marine Fast Cure Adhesive Sealants, Waterproof Construction Glue for Fiberglass & More - 10 fl oz Cartridge, Pack of 1 & Newborn 930-GTD Drip-Free Smooth Hex Rod Cradle Caulking Gun

Loctite PL Marine Fast Cure Adhesive Sealants, Waterproof Construction Glue for Fiberglass, Vinyl, Glass & More - 10 fl oz Cartridge, Pack of 1Specifically designed for marine areas and conditions, Loctite PL Marine Fast Cure Adhesive Sealant is a fast setting, moisture cure polyether adhesive sealant that delivers strong bonds above or below the waterline once cured. This tough, paintable sealant dries white withstands both salt water and fresh water and does not shrink or bubble on damp surfaces. Loctite PL Marine Fast Cure Adhesive Sealant sets in just 30 minutes and fully cures in 24 hours for a watertight, flexible seal that’s ideal for through-hull fastening and deck fittings deck to hull joints, port lights, moldings, struts and planking and stem joints. Free of solvents, phthalates and isocyanates, Loctite PL Marine Fast Cure Adhesive Sealant stays permanently flexible and adheres to teak and other woods, fiberglass, vinyl, glass, FRP, metal, gelcoat, polycarbonate, and most plastics (test all plastic substrates for bond strength and compatibility before use).Newborn 930-GTD Drip-Free Smooth Hex Rod Cradle Caulking Gun with Gator Trigger Comfort Grip, 1/10 Gallon Cartridge, 10:1 Thrust RatioThe Newborn 930-GTD Drip-Free Smooth Hex Rod Cradle caulking gun has a steel half-barrel frame that fits 1/10-gal. cartridges and has a 10:1 thrust ratio for use with low viscosity materials such as latex. The smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod. The rod retracts after each pull of the trigger, removing pressure from the tube to help prevent dripping. The handle and trigger are padded for comfort. There is a welded plate in the back for securing the cartridge in place. A seal puncture tool and a spout cutter are built into the side of gun for opening cartridges without a knife, and the hook on the back allows it to hang on a ladder. Caulking guns, also called caulk or cartridge guns, dispense a controlled flow of products such as caulk, sealants, and adhesives from a tube or cartridge. A manual caulking gun consists of a frame which holds the tube, a trigger, and a rod which moves forward when the trigger is depressed, dispensing the product. Manual caulking guns have a thrust ratio; the higher the thrust ratio, the easier it is to dispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking guns also have a frame and a trigger, but are used with an air pressure regulator that pushes the product from the tube using air pressure instead of a rod. Newborn Brothers Company, Inc. manufactures sealant and adhesive dispensers and accessories. The company was founded in 1974 and is headquartered in Jessup, MD.

• Product 1: Waterproof: Polyether adhesive sealant withstands saltwater and freshwater environments to form a watertight, flexible seal above or below the waterline
• Product 1: Fast Setting: Paintable sealant sets in just 30 minutes and fully cures in 24 hours
• Product 1: Resiliant: Permanently flexible bond does not shrink when cured and does not bubble on damp surfaces
• Product 1: Strong Bond: Adheres to teak and other woods, fiberglass, vinyl, glass, FRP, metal, gel coat, polycarbonate and most plastics
• Product 2: Steel half-barrel (also called cradle) frame caulking gun for 1/10-gal. cartridges
• Product 2: Thrust ratio of 10:1 for use with low viscosity materials
• Product 2: Smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod
• Product 2: Rod retracts after each pull of the trigger to help prevent dripping